-
Plate Processing
A fully automated line for blasting and priming steel
plate drastically reduces field blasting and priming cost
-
Oversize Fabrications
An 11’ O.D. x 45’L and 83,000 LBS vessel uses a high
temperature coating to ensure resistance after installation
-
10 Acre Facility
Ability to accommodate large projects such as the 100-150’L
metalized bridge girders used for highway 407 in Ontario
-
Pre-Construction Primers
REDI-PLATE™ is a proprietary process to apply
inorganic weldable pre-construction primer to steel plate
-
Renewable Energy Projects
Over 200 wind turbine hubs were blasted, thermal sprayed,
coated, and packaged to be installed in wind farms for Ontario
-
Optimal Quality Assurance
Quality control performed and approved
by NACE level 3 inspectors
-
Time Saving Models
An overhead monorail runs through all stages
of our process for reduced material handling
-
Coating Systems for Highly Corrosive Environments
Application of a six coat system for robust corrosion
protection of custom fabrications used in the marine industry
-
Interior Rail Access
A rail line running through the facility ensures
safe and efficient handling of large fabrications
-
100% Solids Epoxy Coating
All TCPL and Enbridge below ground pipe are protected
with 25.0-35.0 mils dft of Denso 100% solids epoxy
